SSD stands for a solid-state drive which is used in the computers as a storage drive. SSD uses (NAND) flash-based memory by replacing the traditional mechanical hard drives. The major benefits of an SSD are it substantially increases the speed of the computer by improving the read and write speed, enhances battery life, faster sharing of files, etc.
In general, be sure to purchase your hard drive or SSD from a vendor that has tested the storage it sells with your particular type of Mac to ensure full compatibility and ideal performance. Also, be sure always to read the complete specs page for a specific Mac as some compatibility is dependent on OS version, firmware, or other details. Support information for Intel® SSD 330 Series. Using Intel.com Search. You can easily search the entire Intel.com site in several ways.
Since SSDs are used by most of the business enterprises or companies dealing with a huge amount of data, gamers to improve the gaming experience, servers for a faster read, and write speed to effectively serve clients, etc. it becomes important to monitor the health of the SSD.
SSD saves tons of important files based on its storage capacity. Hence, properly monitoring the health of an SSD is crucial to avoid business interruption due to the data loss scenario.
Note: It is recommended to take a regular backup of all your important files to avoid any data loss scenarios on your Windows computer or SSD. If not then, make use of Yodot Hard drive Recovery software which is compatible with all your Windows operating systems including the latest Windows 10 and its previous versions to restore files deleted, lost, and inaccessible from the SSD.
5 Best Reliable SSD Health Check Tools
Below are the 5 most relevant health check tools for a solid-state drive to monitor the health and optimize performance.
Smartmonotools
Smartmonotools comprises of two different utility programs called smartctl, which is a command-line utility and smartd, a daemon program providing monitoring service. These utility programs analyze the performance of SSD or HDD using the Self-Monitoring, Analysis, and Reporting Technology System (SMART).
Most importantly Smartmonotools issues the early warning of SSD failure. During such time you can easily backup all your important data saved on the SSD to avoid data loss.
The Smartmonotools was first developed for the Linux operating system and then, it has been ported to Darwin for Mac OS X (no SCSI support yet), FreeBSD, NetBSD, OpenBSD, OS/2 (no SCSI support), Solaris and Windows operating system.
Hard Disk Sentinel
Hard Disk Sentinel is a specialized tool to monitor and analyze SSD or HDD. By installing this tool on your Windows computer, you can easily find reports on SSD's performance degradation, health, temperature, disk transfer speed in real-time, failures, etc. This software can even track and fix multiple issues related to your SSD.
This tool is an all in one performance review software to monitor the status of internal hard disks, external HDD, SSD, Hybrid disk drives, NAS drives, and many others.
Intel Solid-State Drive Toolbox
The Intel Solid-State Drive Toolbox is an Intel's official drive management program for the Windows operating system. This tool tracks the latest information about the SSD, runs full diagnostic scans to understand the read and write capacity of your Solid State Drives, performs the firmware update, and also optimizes the performance for a healthier life.
In case if you lose data on your SSD due to various reasons like accidental deletion of files from SSD, formatting SSD, solid-state drive corruption, etc. then you can easily recover data using Yodot software in simple clicks. Yodot is a specialized data recovery tool to restore data from various internal and external storage devices like SSD, external hard drive, USB, etc.
Crystal Disk Info
Crystal Disk Info is an SSD health check tool that works on the SMART function to give you information related to Solid State Drive performance or status. Most importantly, this tool even monitors the current disk temperature.
With the help of this software, you can access the latest data such as the interface port details, buffer size, total power counts/ hours, reading and writing speed, etc. This information easily helps you understand the current status of your SSD.
Samsung Magician
Samsung Magician is a wonderful tool to analyze your SSD including the total bytes written on it to give you a complete SSD performance report. This tool performs a S.M.A.R.T. Check to verify the health of your SSD and detect probable SSD failures before they occur.
Samsung Magician is one of the best tools to optimize your SSD performance on your Windows computer and compare the performance scores with the prior results. Moreover, you can also encrypt the SSD drive to protect your private data.
Conclusion:
There is no doubt that monitoring the health of an SSD is crucial as it saves a huge amount of important data. In today's world, verifying and improving the performance of SSDs by repairing errors and managing data on it is easy due to the Health Check tools available. If you incur any data loss scenario on your SSD, then you can install Yodot Hard drive recovery tool safely to restore all your deleted or lost data from formatted, corrupted SSD, internal or external HDD, memory card, USB drive, etc.
Now Compatible with macOS 10.12, Sierra
What is Scannerz for Mac OS X?
Scannerzfor Mac OS X is a set of tools designed to help you identify and solve hardware and software problems on your system. The package consists of Scannerz, Performance Probe 2, FSE or FSE-Lite, and Phoenix. We also have a basic package named Scannerz Lite which is a simplified version of Scannerz and will be described later.
Scannerz, the primary tool in the package, can evaluate internal and external hard drives and SSDs, the system bus, the system RAM, as well as all drive interconnections. With Scannerz, you can do the following:
- Detect bad sectors/blocks on a hard drive or SSD - Nearly every drive testing tool on the market has this capability, so of course Scannerz and Scannerz Lite do as well. Even if your system doesn't appear to have problems, doing a scan on the drive or SSD once a month may allow you to catch problems before they become serious. If you have problems with a hard drive or SSD, Scannerz will identify it and tell you how severe the problems are.
- Detect weak sectors on a hard drive - Scannerz and Scannerz Lite are the only commercially available tools on the market with this capability. A weak sector differs from a bad sector in that it can still be read, but only with great difficulty. The presence of weak sectors often lead to the infamous 'spinning beach balls' associated with delays, but an error is never logged or identified by the system because the operation eventually succeeds. For this reason, weak sectors can be more annoying than bad sectors. Scannerz is the only tool commercially available that can detect this and make it clear how they're impacting your system.
Intel Ssd Toolbox For Mac Os Versions
- Isolate internal and external cable problems - This is another feature other testing products on the market don't have. Put Scannerz into its Diagnostic Mode and test the interface on a volume. If there are problems, Scannerz will catch them. Diagnostics Mode tests are not available with Scannerz Lite.
Download Intel Ssd Migration Toolbox
- Identify emerging system or drive related performance problems before they become serious - Another feature Scannerz uses is historical drive analysis. When a hard drive or SSD is initially tested, Scannerz stores tons of performance data on the drive, and over the life of the drive it compares current profile data with the original data. If a marked difference exists, there's probably something going wrong, and Scannerz will tell you about it.
- Isolate certain logic board faults associated with the computers I/O subsystem - Unlike other tools on the market a combination of tests using Scannerz can reveal existing or emerging emerging problems with the CPU, RAM, or system bus. Unfortunately, if errors are detected here it usually means the logic board has problems, but at least you won't be wasting your time replacing cables or buying new hard drives or SSDs only to find the same problems still exist.
- Automatically diagnose problems with ScannerzDiagnostics Mode- With Scannerz Diagnostics Mode, tests are configured via a simple setup procedure and then the tests are started. Scannerz does the rest! If errors or warnings have been detected during any regular tests, this mode will analyze them and tell them what the problem is.
- Test when you want to - Scannerz allows you to start, stop, and resume a test when you want to, while other products on the market require uninterrupted test time to test a drive's integrity. If the drive is big, this may tie your system down for hours. If you have a big, slow backup drive with terabytes of data on it, do you really want to tie your system up for hours on end just to evaluate the drive? With Scannerz you can test your drive in separate sessions, over lunch hours for example, and start, stop, and resume them at your convenience. There's no longer any need for obtrusively tying the system up for hours on end any more like other products force you to do.
- Scannerz is easy to use - All versions of Scannerz were designed to be easy to use. All you need to do to use it is click on a drive or volume you wish to evaluate and start a test. During the testing process, Scannerz will be tracking more than hard drive or SSD data, it will be making other measurements on your system to help identify other problems, such as cable, RAM, and system bus or CPU problems. If problems exist, they may be easily and thoroughly evaluated using Scannerz Diagnostics Mode. In Diagnostics Mode, Scannerz can run tests on the drive or other system components to help you identify the root cause of the problems.
Mac Os Intel
Aside from detecting existing problems with a system, using the product once a month on a system that appears to be in good working order may very well identify problems that are just beginning to emerge.
Click HERE to see a tutorial on Scannerz basic operation. Click HERE to learn more about Scannerz advanced testing capabilities. To see some screenshots of Scannerz in use, click on the camera icon below.
Other Products in this Package:
The other products in the Scannerz package are Performance Probe 2, FSE or FSE-Lite, and Phoenix. Each of these may be purchased as stand alone packages, but they are all included in the standard Scannerz packages (not Scannerz Lite).
Performance Probe 2 can help isolate problematic applications and identify excessive drive and network use. Many times when problems occur, they aren't related to hardware at all but they have symptoms which act like drive or system problems. This is why this application is included in the package. Performance Probe 2 continually monitors the system and displays basic system resource consumption in a small window. If the system starts to show signs of problems, the user can click on a button which will allow the user to monitor memory and CPU consumption, system loading, and graphically depict network and drive use. Click HERE to learn more about Performance Probe 2.
FSE or FSE-Lite can identify the sources of excessive drive use and monitor drive activity. FSE is configurable, whereas FSE-Lite is not. Aside from identifying which applications are 'hitting' the drive, both can log drive activity when problematic applications, such as malware or adware are installing themselves or making modifications to a system. Click HERE to learn more about FSE and FSE-Lite.
Adobe creative suite 4 master collection for mac high sierra.
Phoenix is a tool for creating emergency boot volumes from an existing system, attempting file recovery of damaged files from a drive, and can perform basic cloning operations. The emergency boot volume created by Phoenix, which we call a Phoenix Boot Volume, can be used to boot the system for testing, re-install the operating system, and help try to recover data from a failed or failing drive in the event the disk has problems or bad files on it. It's basic cloning capabilities may be used to try and copy data from a damaged drive to a new drive, as well as perform full volume clones from one drive to another on perfectly good drives of SSDs. Click HERE to learn more about Phoenix.
Available Scannerz Packages:
Scannerzvariants come in the following three packages:
- ScannerzwithPerformance Probe 2, Phoenix, and FSE or Mac OS X
- Scannerz with Performance Probe 2, Phoenix, and FSE-Lite for Mac OS X
- Scannerz Lite
The Scannerz packages that include FSE or FSE-Lite, Performance Probe 2, and Phoenix, are referred to as the fully featured versions of the product, whereas Scannerz Lite is a less sophisticated subset of the fully featured version. Performance Probe 2, Phoenix, and FSE can be purchased as standalone products and more detail on them may be obtained by visiting the web page associated with each product. Simply go to the menu bar at the top and click on the link associated with each product in the menu.
Scannerz Lite
Scannerz Lite is a simplified version of Scannerz. It does not include Performance Probe, FSE/FSE-Lite, or Phoenix. Scannerz Lite is intended to be used by someone that simply wants to evaluate their drive and system to see if there are problems, and if so, take it in for servicing.
The following table illustrates the differences between Scannerz and Scannerz Lite, as well as how they compare to other products on the market. A brief write up underneath the table spells out the differences.
Both Scannerz and Scannerz Lite can detect not only errors, but timing irregularities. Irregularities often occur when a drive or a subsystem component is in the process of developing problems. Scannerz and Scannerz Liteare the only commercially available tools on the market with this type of detection capability.
The fully featured release of Scannerz performs drive profiling, which can help the user clearly identify and head off problems related to a drive before they become serious by monitoring the historical performance of the drive and generating reports at the end of each test to indicate the current status of the drive. It also has three test modes named Normal Mode, Diagnostics Mode, and Cursory Mode. Typically, you click on a few buttons to set up a test in Normal Mode, and if Scannerz finds problems or possible developing problems, it quickly evaluates them using Diagnostics Mode. A Diagnostics Mode test is fully configurable allowing the user automatically re-evaluate and thoroughly analyze problems. Both Diagnostics and Cursory mode tests can be manually configured by the user to run customized tests and perform advanced troubleshooting if needed.
Scannerz Lite, on the other hand, is a fairly simple and straightforward tool. It does a test over an entire drive or volume, and when complete it simply informs the user what the status is. There is no option to perform diagnostics or limited scans over suspected problematic regions, there is no logging window, and there is none of the drive profiling and analysis available with the fully featured version of Scannerz. Scannerz Lite provides a quick, easy, and low cost solution for someone that simply wants to ensure their system and drive are operating properly.
Intel Ssd Tool
System RequirementsScannerz and Scannerz-Lite can be run on normally configured systems using Mac OS X 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion), 10.9 (Mavericks), 10.10 (Yosemite), 10.11 (El Capitan), and 10.12 (Sierra) using supported 32 or 64 bit Intel processors. Supported drive interfaces include SATA, IDE, FireWire, PCIe, Thunderbolt, and USB 2.0 (or greater). Both Scannerz and Scannerz-Lite are fully capable of handling Core Storage components, including full volume encryption using File Vault 2 where supported by the OS. Additionally, products in the Scannerz family can handle multi-drive virtual volumes using Core Storage or Apple RAID on a component basis, and provides general support for most implementations of hardware RAID, and limited support for third party software RAID implementations.
Scannerz and Scannerz-Lite will not support any of the following types of devices:
- USB 1.0 or 1.1 devices, because the devices are so slow.
- Network drives, because they're too susceptible to network and connection problems
- Drives connected via Xsan or SAN, because so few of them are in use on normal systems.
- Optical drives of any type, because optical media itself tends to be the problem, not the drive.
- Very old hard drives using MFM and many SCSI interfaces, because they're rarely used anymore.
None of these devices should stop Scannerz or Scannerz Lite from operating properly, we've simply decided not to support them.
Note: It is recommended to take a regular backup of all your important files to avoid any data loss scenarios on your Windows computer or SSD. If not then, make use of Yodot Hard drive Recovery software which is compatible with all your Windows operating systems including the latest Windows 10 and its previous versions to restore files deleted, lost, and inaccessible from the SSD.
5 Best Reliable SSD Health Check Tools
Below are the 5 most relevant health check tools for a solid-state drive to monitor the health and optimize performance.
Smartmonotools
Smartmonotools comprises of two different utility programs called smartctl, which is a command-line utility and smartd, a daemon program providing monitoring service. These utility programs analyze the performance of SSD or HDD using the Self-Monitoring, Analysis, and Reporting Technology System (SMART).
Most importantly Smartmonotools issues the early warning of SSD failure. During such time you can easily backup all your important data saved on the SSD to avoid data loss.
The Smartmonotools was first developed for the Linux operating system and then, it has been ported to Darwin for Mac OS X (no SCSI support yet), FreeBSD, NetBSD, OpenBSD, OS/2 (no SCSI support), Solaris and Windows operating system.
Hard Disk Sentinel
Hard Disk Sentinel is a specialized tool to monitor and analyze SSD or HDD. By installing this tool on your Windows computer, you can easily find reports on SSD's performance degradation, health, temperature, disk transfer speed in real-time, failures, etc. This software can even track and fix multiple issues related to your SSD.
This tool is an all in one performance review software to monitor the status of internal hard disks, external HDD, SSD, Hybrid disk drives, NAS drives, and many others.
Intel Solid-State Drive Toolbox
The Intel Solid-State Drive Toolbox is an Intel's official drive management program for the Windows operating system. This tool tracks the latest information about the SSD, runs full diagnostic scans to understand the read and write capacity of your Solid State Drives, performs the firmware update, and also optimizes the performance for a healthier life.
In case if you lose data on your SSD due to various reasons like accidental deletion of files from SSD, formatting SSD, solid-state drive corruption, etc. then you can easily recover data using Yodot software in simple clicks. Yodot is a specialized data recovery tool to restore data from various internal and external storage devices like SSD, external hard drive, USB, etc.
Crystal Disk Info
Crystal Disk Info is an SSD health check tool that works on the SMART function to give you information related to Solid State Drive performance or status. Most importantly, this tool even monitors the current disk temperature.
With the help of this software, you can access the latest data such as the interface port details, buffer size, total power counts/ hours, reading and writing speed, etc. This information easily helps you understand the current status of your SSD.
Samsung Magician
Samsung Magician is a wonderful tool to analyze your SSD including the total bytes written on it to give you a complete SSD performance report. This tool performs a S.M.A.R.T. Check to verify the health of your SSD and detect probable SSD failures before they occur.
Samsung Magician is one of the best tools to optimize your SSD performance on your Windows computer and compare the performance scores with the prior results. Moreover, you can also encrypt the SSD drive to protect your private data.
Conclusion:
There is no doubt that monitoring the health of an SSD is crucial as it saves a huge amount of important data. In today's world, verifying and improving the performance of SSDs by repairing errors and managing data on it is easy due to the Health Check tools available. If you incur any data loss scenario on your SSD, then you can install Yodot Hard drive recovery tool safely to restore all your deleted or lost data from formatted, corrupted SSD, internal or external HDD, memory card, USB drive, etc.
Now Compatible with macOS 10.12, Sierra
What is Scannerz for Mac OS X?
Scannerzfor Mac OS X is a set of tools designed to help you identify and solve hardware and software problems on your system. The package consists of Scannerz, Performance Probe 2, FSE or FSE-Lite, and Phoenix. We also have a basic package named Scannerz Lite which is a simplified version of Scannerz and will be described later.
Scannerz, the primary tool in the package, can evaluate internal and external hard drives and SSDs, the system bus, the system RAM, as well as all drive interconnections. With Scannerz, you can do the following:
- Detect bad sectors/blocks on a hard drive or SSD - Nearly every drive testing tool on the market has this capability, so of course Scannerz and Scannerz Lite do as well. Even if your system doesn't appear to have problems, doing a scan on the drive or SSD once a month may allow you to catch problems before they become serious. If you have problems with a hard drive or SSD, Scannerz will identify it and tell you how severe the problems are.
- Detect weak sectors on a hard drive - Scannerz and Scannerz Lite are the only commercially available tools on the market with this capability. A weak sector differs from a bad sector in that it can still be read, but only with great difficulty. The presence of weak sectors often lead to the infamous 'spinning beach balls' associated with delays, but an error is never logged or identified by the system because the operation eventually succeeds. For this reason, weak sectors can be more annoying than bad sectors. Scannerz is the only tool commercially available that can detect this and make it clear how they're impacting your system.
Intel Ssd Toolbox For Mac Os Versions
- Isolate internal and external cable problems - This is another feature other testing products on the market don't have. Put Scannerz into its Diagnostic Mode and test the interface on a volume. If there are problems, Scannerz will catch them. Diagnostics Mode tests are not available with Scannerz Lite.
Download Intel Ssd Migration Toolbox
- Identify emerging system or drive related performance problems before they become serious - Another feature Scannerz uses is historical drive analysis. When a hard drive or SSD is initially tested, Scannerz stores tons of performance data on the drive, and over the life of the drive it compares current profile data with the original data. If a marked difference exists, there's probably something going wrong, and Scannerz will tell you about it.
- Isolate certain logic board faults associated with the computers I/O subsystem - Unlike other tools on the market a combination of tests using Scannerz can reveal existing or emerging emerging problems with the CPU, RAM, or system bus. Unfortunately, if errors are detected here it usually means the logic board has problems, but at least you won't be wasting your time replacing cables or buying new hard drives or SSDs only to find the same problems still exist.
- Automatically diagnose problems with ScannerzDiagnostics Mode- With Scannerz Diagnostics Mode, tests are configured via a simple setup procedure and then the tests are started. Scannerz does the rest! If errors or warnings have been detected during any regular tests, this mode will analyze them and tell them what the problem is.
- Test when you want to - Scannerz allows you to start, stop, and resume a test when you want to, while other products on the market require uninterrupted test time to test a drive's integrity. If the drive is big, this may tie your system down for hours. If you have a big, slow backup drive with terabytes of data on it, do you really want to tie your system up for hours on end just to evaluate the drive? With Scannerz you can test your drive in separate sessions, over lunch hours for example, and start, stop, and resume them at your convenience. There's no longer any need for obtrusively tying the system up for hours on end any more like other products force you to do.
- Scannerz is easy to use - All versions of Scannerz were designed to be easy to use. All you need to do to use it is click on a drive or volume you wish to evaluate and start a test. During the testing process, Scannerz will be tracking more than hard drive or SSD data, it will be making other measurements on your system to help identify other problems, such as cable, RAM, and system bus or CPU problems. If problems exist, they may be easily and thoroughly evaluated using Scannerz Diagnostics Mode. In Diagnostics Mode, Scannerz can run tests on the drive or other system components to help you identify the root cause of the problems.
Mac Os Intel
Aside from detecting existing problems with a system, using the product once a month on a system that appears to be in good working order may very well identify problems that are just beginning to emerge.
Click HERE to see a tutorial on Scannerz basic operation. Click HERE to learn more about Scannerz advanced testing capabilities. To see some screenshots of Scannerz in use, click on the camera icon below.
Other Products in this Package:
The other products in the Scannerz package are Performance Probe 2, FSE or FSE-Lite, and Phoenix. Each of these may be purchased as stand alone packages, but they are all included in the standard Scannerz packages (not Scannerz Lite).
Performance Probe 2 can help isolate problematic applications and identify excessive drive and network use. Many times when problems occur, they aren't related to hardware at all but they have symptoms which act like drive or system problems. This is why this application is included in the package. Performance Probe 2 continually monitors the system and displays basic system resource consumption in a small window. If the system starts to show signs of problems, the user can click on a button which will allow the user to monitor memory and CPU consumption, system loading, and graphically depict network and drive use. Click HERE to learn more about Performance Probe 2.
FSE or FSE-Lite can identify the sources of excessive drive use and monitor drive activity. FSE is configurable, whereas FSE-Lite is not. Aside from identifying which applications are 'hitting' the drive, both can log drive activity when problematic applications, such as malware or adware are installing themselves or making modifications to a system. Click HERE to learn more about FSE and FSE-Lite.
Adobe creative suite 4 master collection for mac high sierra.
Phoenix is a tool for creating emergency boot volumes from an existing system, attempting file recovery of damaged files from a drive, and can perform basic cloning operations. The emergency boot volume created by Phoenix, which we call a Phoenix Boot Volume, can be used to boot the system for testing, re-install the operating system, and help try to recover data from a failed or failing drive in the event the disk has problems or bad files on it. It's basic cloning capabilities may be used to try and copy data from a damaged drive to a new drive, as well as perform full volume clones from one drive to another on perfectly good drives of SSDs. Click HERE to learn more about Phoenix.
Available Scannerz Packages:
Scannerzvariants come in the following three packages:
- ScannerzwithPerformance Probe 2, Phoenix, and FSE or Mac OS X
- Scannerz with Performance Probe 2, Phoenix, and FSE-Lite for Mac OS X
- Scannerz Lite
The Scannerz packages that include FSE or FSE-Lite, Performance Probe 2, and Phoenix, are referred to as the fully featured versions of the product, whereas Scannerz Lite is a less sophisticated subset of the fully featured version. Performance Probe 2, Phoenix, and FSE can be purchased as standalone products and more detail on them may be obtained by visiting the web page associated with each product. Simply go to the menu bar at the top and click on the link associated with each product in the menu.
Scannerz Lite
Scannerz Lite is a simplified version of Scannerz. It does not include Performance Probe, FSE/FSE-Lite, or Phoenix. Scannerz Lite is intended to be used by someone that simply wants to evaluate their drive and system to see if there are problems, and if so, take it in for servicing.
The following table illustrates the differences between Scannerz and Scannerz Lite, as well as how they compare to other products on the market. A brief write up underneath the table spells out the differences.
Both Scannerz and Scannerz Lite can detect not only errors, but timing irregularities. Irregularities often occur when a drive or a subsystem component is in the process of developing problems. Scannerz and Scannerz Liteare the only commercially available tools on the market with this type of detection capability.
The fully featured release of Scannerz performs drive profiling, which can help the user clearly identify and head off problems related to a drive before they become serious by monitoring the historical performance of the drive and generating reports at the end of each test to indicate the current status of the drive. It also has three test modes named Normal Mode, Diagnostics Mode, and Cursory Mode. Typically, you click on a few buttons to set up a test in Normal Mode, and if Scannerz finds problems or possible developing problems, it quickly evaluates them using Diagnostics Mode. A Diagnostics Mode test is fully configurable allowing the user automatically re-evaluate and thoroughly analyze problems. Both Diagnostics and Cursory mode tests can be manually configured by the user to run customized tests and perform advanced troubleshooting if needed.
Scannerz Lite, on the other hand, is a fairly simple and straightforward tool. It does a test over an entire drive or volume, and when complete it simply informs the user what the status is. There is no option to perform diagnostics or limited scans over suspected problematic regions, there is no logging window, and there is none of the drive profiling and analysis available with the fully featured version of Scannerz. Scannerz Lite provides a quick, easy, and low cost solution for someone that simply wants to ensure their system and drive are operating properly.
Intel Ssd Tool
System RequirementsScannerz and Scannerz-Lite can be run on normally configured systems using Mac OS X 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion), 10.9 (Mavericks), 10.10 (Yosemite), 10.11 (El Capitan), and 10.12 (Sierra) using supported 32 or 64 bit Intel processors. Supported drive interfaces include SATA, IDE, FireWire, PCIe, Thunderbolt, and USB 2.0 (or greater). Both Scannerz and Scannerz-Lite are fully capable of handling Core Storage components, including full volume encryption using File Vault 2 where supported by the OS. Additionally, products in the Scannerz family can handle multi-drive virtual volumes using Core Storage or Apple RAID on a component basis, and provides general support for most implementations of hardware RAID, and limited support for third party software RAID implementations.
Scannerz and Scannerz-Lite will not support any of the following types of devices:
- USB 1.0 or 1.1 devices, because the devices are so slow.
- Network drives, because they're too susceptible to network and connection problems
- Drives connected via Xsan or SAN, because so few of them are in use on normal systems.
- Optical drives of any type, because optical media itself tends to be the problem, not the drive.
- Very old hard drives using MFM and many SCSI interfaces, because they're rarely used anymore.
None of these devices should stop Scannerz or Scannerz Lite from operating properly, we've simply decided not to support them.
Purchasing Scannerz
To purchase one of the Scannerz packages, click on the Buy Scannerz Now button below.
Prices:
$21.95 For Scannerz Lite
$39.95 For Scannerz with FSE-Lite, Performance Probe, and Phoenix
$49.95 For a Scannerz with FSE, Performance Probe, and Phoenix
